File Size346.99 KB
Tags   Maintenance     Repairs     Technical Manuals     U.S. Army  
ARMY-TM-11-6625-2884-20P Aviation Unit Maintenance Repair Parts and Special Tools List for Test Set, Countermeasures Set TS-3615-ALQ-136(V).pdfDownload 

Aviation Unit Maintenance Repair Parts and Special Tools List for Test Set, Countermeasures Set TS-3615-ALQ-136(V)

1. Scope 
This manual lists spares and repair parts; special tools; 
special test, measurement, and diagnostic equipment 
(TMDE), and other special support equipment required 
for performance of aviation intermediate maintenance 
(AVUM) of the TS-3615/ALQ-136(V). It authorizes the 
requisitioning and issue of spares and repair parts as 
indicated by the source and maintenance codes. 
2. General 
This Repair Parts and Special Tools List is divided into 
the following sections: 
Parts List. A list of spares and 
repair parts authorized for use in the performance of 
maintenance. The list also includes parts which must be 
removed for replacement of the authorized parts. Parts 
lists are composed of functional groups in numeric 
sequence, with the parts in each group listed in figure 
and item number sequence. 
b. Section ///. Special Took List. Not applicable. 
National Stock Number and Part Number 
Index. A list, in National item identification number 
(NIIN) sequence, of all National stock numbers (NSN) 
appearing in the listings, followed by a list, in alpha- 
numeric sequence, of all part numbers appearing in the 
listings. National stock numbers and part numbers are 
cross-referenced to each illustration figure and item 
number appearance. 
3. Explanation of Columns 
a. Illustration. This column is divided as follows: 
(l) Figure number. Indicates the figure number of 
the illustration on which the item is shown. 
(2) Item number. The number used to identify item 
called out in the illustration. 
b. Source, Maintenance, and Recoverability (SMR) 
(l) Source code. Source codes indicate the manner 
of acquiring support items for maintenance, repair, or 
overhaul of end items. Source codes are entered in the 
first and second positions of the Uniform SMR Code 
format as follows:
-Item procured and stocked for anticipated Or 
known usage. 
Installation drawing, diagram, instruction sheet, 
XC — 
field service drawing, that is identified by 
manufacturer's part number,


Have A Comment On This Article? Post It Here.

Comments are moderated and will not be published until approved. Your email address will be kept confidential. Please review our Comment Policy before posting your comment.